Indicator Lights - Xerox DocuColor 12 User Manual

The Stapler plugs in at the lower right side toward
the rear of the copier/printer (Figure 7). The
convenience stapler unit includes the stapler as
well as a holder for used staples and stationary
supplies.
Use the stapler for restapling your original
documents after copies have been made or as an
off-line stapler.

Indicator lights

Indicator lights (Figure 8) signify the status of the
stapler:
•
When the green "ready" light is lit, the staple
cartridge has more than 20 staples available
and is ready to staple.
•
When the red light is on, the staple cartridge
has fewer than 20 staples available and
should be replaced.
•
When the green and red lights are off, a jam
has occurred or the stapler is unplugged.
DOCUCOLOR 12 USER GUIDE
Figure 7: The Stapler power cord
Figure 8: Indicator Lights
12–9
1
3
4
5
12
6
7
ACCESSORIES