Accessing The Hcf From The Client Workstation - Xerox DocuColor 12 User Manual

Accessing the HCF from the client workstation

From the client workstation, you should add the
HCF to the available device options.
This procedure must be repeated at each client
workstation.
Even when the HCF is installed, you should use
AutoSelectTray as the default tray. The printer
will automatically select the HCF for the job if it
contains the requested paper.
You can also check the Status of the HCF from the
web client, as for any other paper tray.
Windows 98/95
1
From the Start menu, select Settings, then
Printers, and the desired printer.
2
From the File menu, select Properties.
3
Select the Device Options tab.
4 From the Installable options scroll menu, select
Tray 6 (High Capacity Feeder).
5
From the "Change setting for Tray 6 (High
Capacity Feeder)" menu, select Installed.
6
Click OK and close the Printers window.
DOCUCOLOR 12 USER GUIDE 12–5
1
3
4
5
12
6
7
ACCESSORIES