Adding Staples - Xerox DocuColor 12 User Manual

1 Open the stapler by grasping the cover at the two
indentations on the upper right and left side and
pulling it straight up and back (Figure 10).
2
3
2
Pull the empty cartridge out by holding the gold
handle at the top tabs and pulling the cartridge
straight out (Figure 11). Dispose of the cartridge
according to local regulations.
3
Align the new cartridge so that the bottom white
tabs are on the bottom edge of the metal bracket
and below the black plastic side arms.
4
4
Push the cartridge firmly to the back until the
cartridge clicks into place.
5 Close the cover by moving it down until it clicks
close.
12
5
6
7
ACCESSORIES

Adding staples

Figure 10: Opening the stapler
Figure 11: Removing the cartridge
12–12 DOCUCOLOR 12 USER GUIDE