Linefeed - Fluke 9140 User Manual

9140 Dry-well Calibrator
User's Guide
7.8.1.2
32

Linefeed

The final parameter in the serial interface menu is the linefeed mode. This pa-
rameter enables (on) or disables (off) transmission of a linefeed character (LF,
ASCII 10) after transmission of any carriage-return. The linefeed parameter is
indicated by,
Serial linefeed parameter
LF
Press "SET" to access the linefeed parameter.
Current linefeed setting
LF= On
The mode may be changed using "UP" or "DOWN" and pressing "SET".
New linefeed setting
LF= OFF