Fluke 9140 User Manual page 42

Table 3 9140 controller communications commands continued
Command Description
Set serial linefeed mode:
Set serial linefeed mode to on
Set serial linefeed mode to off
Miscellaneous Other Commands
Read firmware version number
Read structure of all commands
Read ALL operating parameters
Legend:
Note:
Command Command
Format Example
lf[eed]=on/of[f]
lf[eed]=on lf=on
lf[eed]=of[f] lf=of
*ver[sion] *ver
h[elp] h
all all
[] Optional Command data
{} Returns either information
n Numeric data supplied by user
9 Numeric data returned to user
x Character data returned to user
When DUPLEX is set to FULL and a command is sent to READ, the command is returned followed by a
carriage return and linefeed. Then the value is returned as indicated in the RETURNED column.
8 Digital Communication Interface
Returned
Returned Example
ver.9999,9.99 ver.9140,1.21
list of commands
list of parameters
Interface Commands
Acceptable
Values
ON or OFF
37