Restoring To The Factory Setting Values - A&D SC-30KAM Instruction Manual

9-3. Restoring to the factory setting values

If the gravity acceleration value or calibration weight value is changed unintentionally,
restore those values to the factory setting values, as follows.
Make sure that the scale is in the weighing
mode (displaying "kg", "lb", "oz" or "pcs").
1. Press and hold the TARE switch until
the gravity acceleration value appears,
and release the switch.
2. Press the
ClrC
display "
.
3. Press and hold the UNITS switch until
ClrCno
" " appears blinking.
4. Press the PRINT switch.
ClrCno
" " changes to "
ClrCgo
5. When "
TARE switch. The factory setting
values are
displayed.
To finish the restoring procedure, turn the
power OFF.
UNITS switch twice and
" .
ClrCgo
".
" is displayed, press the
restored and "
(more than 4 seconds)
end
" is
19
Press and hold
Release
Press twice
Press and hold
Press
Press