Function List - A&D SC-30KAM Instruction Manual

10-2. Function list

Item
Auto power-off
function
poff
Weight display
resolution
r5eo
Serial interface
Baud rate
bp5
Serial interface
Data output
mode
prt
Serial interface
Response
aCk
Comparator
mode
Cp
sStability
Response speed
Cond
Zero tracking
trc
Decimal point
dp
Initialization
Clrf
Parameter
0 Auto power-off disabled
1
Auto power-off enabled
0 Normal (1/3,000)
1 High (1/6,000 or 1/7,500)
0 2400 bps
1 4800 bps
2
9600 bps
Stream mode
0
Command mode
1 Command mode only
Print switch mode
2
Command mode
Auto-print mode +/- data
3
Command mode
Auto-print mode + data
4
Command mode
0 No reply except "Q" command
1 Reply to commands
0 Comparator disabled
1 Compares all data
2 Compares all stable data
3
Compares data of > +4d or < -4d
4
Compares stable data of > +4d or < -4d
5 Compares data of > +5d
6 Compares stable data of > +5d
0 Weak / fast response
1 Normal / normal response
2 Strong / slow response
0 Zero tracking function disabled
1 Zero tracking function enabled
0 Dot (.)
1 Comma (,)
no Initialization disabled
go Initialization enabled
Factory setting
d = minimum display, the minimum mass that can be weighed
Even the counting mode uses "d" for judgment.
Description
21
Turns the power OFF
automatically
Changes "d",
minimum display
Comparison conditions
d = minimum display
Tracks the zero drift
Selects a decimal
point type
.
Restores the function
settings to the factory
setting values.