Replacing The Oven Light; Removable Oven Control Knob - Maytag 4348178 Use And Care Manual

REPLACING THE OVEN LIGHT (Some Models)
Do not touch oven bulb when hot, wrth wet hands, or wipe oven light area
with wet cloth Unplug or drsconnect the eleclncal supply to range before
removing
Never touch the electrically live metal collar on the bulb when replac-
ing it.
Electrical power must be shut off if you have to replace a broken bulb.
UPPER SELF-CLEANING OVENS
1, Remove the three screws and
lift
OH the glass retarner, glass cover
and gasket.
2. Replace the bulb with a 40 watt appliance bulb
BULB
3 Replace the gasket, glass cover and glass retatner. Tighten screws
securely
b
l-b
SOCKET
_----
LOWER NON-SELF-CLEANING OVENS:
Replace bulb with a 40 watt appliance bulb.
I+&.&
u
I$&
NON-SELF-CLEANING OVENS
REMOVABLE LOWER OVEN CONTROL KNOB
All control knobs may be removed for easy cleaning by pulling the knob
2
straight off the stem.
See the cleaning chart on page 13
z
Caution: Read these instructions carefully before replacing the knobs.
Replacing the knobs improperly will damage the knobs and the spring
u
clip on the stems. If this happens, the knobs will fit loosely.
5
To correctly replace knobs:
1.
E
Look al the stem. It has a groove In each side. The groove on one
side has a spring ckp, Ihe other groove is clear (see illustration).
-E
2. Check the inside 01 the knob and find the molded rib.
z
3. Replace the knob by litting the molded rib inside the knob into the
clear groove on Ihe stem.
z
16