Table of Contents
Advertisement
REMOVABLE OVEN DOOR(S) (24" wide units)
The oven door can be removed for cleaning.
To remove:
1. Open the door to the stop positron (see rllustratron)
2
Grasp the door at each srde and lift up and off the hinges.
See the cleaning chart on page 13.
NOTE: When the door is removed and hinge arms are at stop position,
do not bump or try to move the hinge arms. The hinges could snap back
causing an injury to the hands or damage to the porcelain on the front
of the range. Cover the hinges with toweling or empty towel rolls while
working in the oven area.
To replace:
1
Hold the door over the hinges with the slots at the bottom edge of
the door lined up wrth the hrnges. The hinge arms must still be in
the stop position,
2.
Slide the door down onto the hinges as tar as it will go and close
the door.
STOP
POSITION
REMOVABLE OVEN DOOR(S) (27" wide units)
The oven doors can be removed for cleaning.
To remove:
c
1, Open the door to lhe brotl slop posrtron and grasp the door at each
5
srde (see Illustration).
2
Lrft the door up a brt, then pull strarghl toward you.
w
To replace:
s
1
Make sure that hrnge arms are rn posrtron B (brorl stop posltron)
Note: If a hinge arm snaps into pqsition A, it must be moved back to
F
position B before the door can be replaced.
2
.I
Carefully Insert the hrnge arms through the openings In the front frame
5
and push the door Into place while holdrng the door up.
3. When the bottom edge of the door IS flush agarnst the front frame,
z
allow the door to settle Into place
0
14
Advertisement
Table of Contents
