Oven Light; Oven Door - Maytag W10669246A Use & Care Manual

Tiny scratches and abrasions
®
affresh Cooktop Cleaner and Cooktop Cleaning Pads:
Clean as soon as cooktop has cooled down. Rub product into
surface with a Cooktop Cleaning Pad. Continue rubbing until
white film disappears. Scratches and abrasions do not affect
cooking performance, and after many cleanings they will
become less noticeable.
COOKTOP CONTROLS
To avoid damage to the cooktop controls, do not use steel wool,
abrasive cleansers or oven cleaner.
To avoid damage, do not soak knobs.
When removing or replacing knobs, make sure knobs are in the Off
position.
Do not remove seals under knobs, if present.
Cleaning Method:
Warm, soapy water:
Pull knobs straight away from control panel to remove.
CONTROL PANEL
To avoid damage to the control panel, do not use abrasive
cleaners, steel-wool pads, gritty washcloths or abrasive paper
towels.
To avoid turning the controls on while cleaning, you may activate
the Control Lock feature (on some models). See "Control Lockout"
section.
Cleaning Method:
Glass cleaner and soft cloth or sponge:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
affresh ® Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See "Assistance or Service" section to order.
OVEN DOOR EXTERIOR
Cleaning Method:
Glass cleaner and paper towels or nonabrasive plastic
scrubbing pad:
Apply glass cleaner to soft cloth or sponge, not directly on
panel.
affresh ® Kitchen and Appliance Cleaner Part Number
W10355010 (not included):
See "Assistance or Service" section to order.
OVEN CAVITY
Do not use oven cleaners.
Food spills should be cleaned when oven cools. At high
temperatures, foods react with porcelain and staining, etching,
pitting or faint white spots can result.
Cleaning Method:
Self-Cleaning cycle:
See "Self-Cleaning Cycle" first.
OVEN RACKS
Cleaning Method:
Self-Cleaning cycle:
See "Self-Cleaning Cycle" first. Remove racks, or they will
discolor and become harder to slide. If this happens, a light
coating of vegetable oil applied to the rack guides will help
them slide.
Steel-wool pad.
20

Oven Light

The ovens light is a standard 40-watt appliance bulb.
Before replacing, make sure the oven and cooktop are cool and the
control knobs are off.
To Replace:
1. Unplug range or disconnect power.
2. Turn the glass bulb cover in the back of the oven
counterclockwise to remove.
3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.

Oven Door

IMPORTANT:
Use two hands to remove oven door(s).
Prior to removing the oven door, prepare a surface where you
will place it. This surface should be flat and covered with a soft
blanket.
To avoid oven door glass breakage:
Do not close the oven door if the racks are not fully inserted
into the oven cavity or when bakeware extends past the front
edge of an oven rack.
Do not set objects on the glass surface of the oven door.
Do not hit glass surfaces with bakeware or other objects.
Do not wipe down glass surfaces until the oven has completely
cooled.
For normal range use, it is not suggested to remove the oven door.
However, if removal is necessary, make sure the oven is off and
cool. Then, follow these instructions. The oven door is heavy.
To Remove:
1. Open oven door all the way.
2. Locate the oven door hinge locks in both corners of the oven
door. Rotate the hinge locks forward and down to the unlocked
position.
3. Partially close the oven door to engage the door latch locks.
The door will stop at this point.
4. Using two hands, lift the oven door while holding both sides.
Continue to push the oven door closed and pull it away from
the oven door frame.
5. Set the oven door(s) aside on the prepared covered work
surface, with the oven door resting on its handle.