Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 96

from AutoCAD as individual print jobs or whether you
need to process several drawings in one drawing set
together. If you want to process several drawings simul-
taneously for printing, activate "generate set with RW-
480 PLOTCLIENT WIN". If you always only want to send
individual jobs from AutoCAD to print and always want
to use the same plot parameter settings, tell the pro-
gram "do not display" this dialog. If you want to decide
before each print and enter new print parameters, sim-
ply let this dialog be "Display" each time".
Plot color merge control: You have two options to
•
choose. By activating "Colors merge" all levels of your
drawing will be merged. At parts, where two or more
colors lie on top of each other, colors will be merged. If
activating the option "Colors overwrite each other"
higher levels overwrite completely levels below. Translu-
cent parts do not overwrite any colour.
15. Quit the plotter settings by clicking on "OK" twice.
After you have carried out the configurations, you can either
send you print jobs from AutoCAD directly to RW-480
PLOTBASE or to the RW-480 PLOTCLIENT WIN. The following
chapter explains the individual settings for the printer parame-
ters.
CONFIGURATION
RW-480 CLIENTS 96