Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 118

out: 1, 1, 1 - 2, 2, 2 - 3, 3, 3.
• Job Plotter
The RW-480 plotter is preset. As a standard, no other plotter is
available for selection.
• Locked print
As soon as the security option is selected in a Client program,
nobody can view and print this job, as long as the correct User
ID has not been entered. The job has the status "Password". This
function is for example if the drawings are to be kept secret. The
print jobs can only be printed by the user that was queried with
respect to the password before plotting. As soon as the job has
been plotted it is automatically deleted. For the password, more
than 32 characters can be accepted, however, it is recom-
mended to use 4 to 32 characters!
• Sample print
Activate this option if you want to check the quality of a print.
Only the first set of copies is plotted. Print out of further sets of
copies is stopped, so that you can examine the quality of the
print. You are then asked, whether you wish to continue with the
print out of the remaining entries or abort the job.
Output
•
You have two possibilities for the output of your printouts on
plotter RW-480: front and rear. The standard setting is output at
the top.
• Notes
This field is free for your notes. You should not use the following
characters: " " < > ; : \
• Document Server
The "Document Server" is a memory unit in the plotter where
RW-480 PLOTCLIENT WEB can send one or several documents
for later printout. The documents are saved in the document
server memory until they are printed out directly at the plotter,
or the job is deleted in the document server. The documents
saved in the document server cannot be sent to printing by RW-
480 PLOTCLIENT WEB!
File Name: Give an unequivocal file name to the job being
PREPARE PRINT JOBS
RW-480 CLIENTS 118