Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 35

Note: Insofar as the function "User authentication" is
activated at the RW-480 plotter, make sure that the
user name here is identical with the user which has
been set up there, otherwise the print job will not be
carried out! To keep a better check on all used user
names, it is advisable always to take the user names
used in the network. If you do not know the user
names set up at the RW-480 plotter, ask your adminis-
trator!
• Customer
Here you can enter the name of the customer, for whom the job
is carried out.
• Account
In this field the account number of the client is entered. This can
be an account number, which you assign in-house or the re-
ceiver of the invoice in-house.
• Notes
This field is free for your notes. You can enter up to maximum
50 characters. Please do not use any quotation marks.
• Distribution
In this field you enter which persons are to receive a copy of the
job. You can enter up to maximum 60 characters. Please do not
use any quotation marks.
• Collate
Activate this field if the plot job is to be printed out collated. Col-
lated means that the entries of an order are printed out as fol-
lows when several copies are required:
E.g. you have the entries A, B and C. Three copies of each are
to be produced. With activated sort ("ON") the print outs are in
the sequence A, B, C - A, B, C - A, B, C. If the printout is not
sorted, the complete number of entries are printed out: A, A, A -
B, B, B - C, C, C.
• Priority
This shows what priority the job has been given by the user:
JOB EDITOR
RW-480 CLIENTS 35