Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 122

fed in the plotter.
• Position
With the "Media Position" you set the symbolic position on the
paper, if the image is to be plotted on a larger paper format.
E.g. If you have a ISO A4-drawing, which is printed at its origi-
nal size on ISO A1, you can enter where the drawing is position
on the larger sheet for printing.
• Mirror
In this area you can set whether the drawing is to be mirrored or
not during plotting. You can choose from four options
OFF: The drawing is not mirrored during plotting.
X: The drawing is mirrored horizontally.
Y: The drawing is mirrored vertically.
XY: The drawing is mirrored about both axes simultaneously;
equates to a 180° rotation.
You usually use these settings if the drawing has been scanned
and saved with a mirror inversion. This is especially important if
a translucence has been scanned with mirror inversion to in-
crease the contrast
• Rotate
Here you can set whether the drawing is to be rotated or not
during plotting. Rotations of 0°, 90°, 180° and 270° are possi-
ble. When set to "Auto", RW-480 PLOTCLIENT WEB rotates
automatically if this results in less wasted paper.
• Cut Mode
The selections available are "Synchro" and "Format". If you
choose "Synchro", the plotter cuts the drawing immediately after
the last data has been printed. This results in optimum paper or
medium use, because it produces the smallest amount of waste
On the other hand, if you want the printout to always be cut to a
standard format, irrespective of how much space remains un-
used, activate "Format".The plotter then always cuts to the next
largest format. This can be a disadvantage if e.g. a drawing is
only around 0.5 cm larger than a ISO A5 page is printed on a
ISO A4 page and thus almost 50 % of the sheet remains un-
used. The advantage is that some folders require exact formats
PREPARE PRINT JOBS
RW-480 CLIENTS 122