Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 127

You can either let RW-480 PLOTCLIENT WEB determine the val-
ues or you can enter the necessary settings yourself. If the pro-
gram is to determine the values, activate "Auto detection".
We recommend that you do not alter the standard values if you
want to enter the settings yourself. Should you nevertheless want
to make a change or to find out more on the topic, compare the
settings with those in your CAD system or read the following
section in the "Calcomp Inc." manual:
"CALCOMP - ONLINE REFERENCE MANUAL" in the section
"Data Message Format".
The standard settings are:
Sync character:
End character:
Double Sync:
Test sum:
The following two examples serve as possible comparisons:
• AutoCAD:
Sync character:
End character:
Double Sync:
Test sum:
• FordCAD:
Sync character:
End character:
Double Sync:
Test sum:
• Scale Pens
Activate the check box, if the pen widths are to be scaled with
the drawing. To avoid possible loss of information during the
printout, you must ensure that you have entered at least one
minimum pen width in "Pen settings" if the drawing is to be re-
duced in size and at least one maximum pen width if the draw-
ing is to be enlarged
• Pen Source from File
If you activate "User", the program will always use your settings.
If you activate this field, you instruct the plotter to use the pen
2 → [setting from 0 to 127 possible]
0 → [setting from 0 to 31 possible]
OFF
OFF
22
13
ON
ON
2
3
OFF
ON
PREPARE PRINT JOBS
RW-480 CLIENTS 127