Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 51

font attributes. Only the font color setting does not have any ef-
fect, because the color is fixed in RW-480 PLOTCLIENT WIN
with black.
• Preview
Use the "Preview" button if you want to view the stamp again be-
fore the final print. In this window you can move the directional
arrows to move from side to side and enlarge or reduce the
view using "+" and "–". The left-hand mouse button can be used
to enlarge a selected area.
However, the preview only applies to the stamp itself and the ar-
rangement of its logo and its text. The preview does not show
you the stamp's position on your drawing, which you set on the
"settings" tab!
• Macros
You can use a macro to enter a text field, which is not filled out
until printed. In the preview you can only see the field function.
All the file details always refer to the drawing or the entry on
which the stamp(s) are printed. The following macros are avail-
able:
Date: With this macro, RW-480 PLOTCLIENT WIN inserts
-
the current date of the print.
File title: This macro only gives the actual file name of the
-
drawing or of the entry without the path details.
Count: This macro is suitable if you have lots of drawings or
-
entries with the same stamp text and you want to differenti-
ate between them by numbering them.
Time: This macro inserts the time the drawing was stamped.
-
Server name: This macro inserts the server PC name, where
-
RW-480 PLOTBASE is installed.
Account: This macro inserts in the stamp the text of the job
-
editor field "Account".
CreationAppl: This macro gives the name of the application
-
which was used for creating a print job.
Customer: This macro inserts in the stamp the text of the job
-
editor field "Customer".
Distribution: This macro inserts in the stamp the text of the
-
job editor field "Distribution".
Job name: This macro inserts in the stamp the text of the
-
job editor field "Job name".
STAMP EDITOR
RW-480 CLIENTS 51