Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 131

Attention: Java Runtime Environment must be in-
stalled, so that the functions described above can be
carried out. Ask your administrator, if an error occurs.
After clicking on "add multiple" you will see the following win-
dow:
If you want to transfer all files from a folder or several files from
various directories at once, first choose "Add folder", then find
the folder in the file selection. A "dummy_file" is shown as the
file name. After you have clicked on "Open", the files contained
in the folder are then listed in the window.
If you also want to add a single file, click on "Add file", find the
file in the file selection dialog and confirm with "Open".
You can also delete individual files, by clinking on the files con-
cerned from the list first and then clicking on "remove".
If you have selected all the files, click on "upload", to send all
the listed entries to the RW-480 PLOTCLIENT WEB. Then press
"Continue", and to add the entries to the entry list. You can se-
lect individual files with "select", to set individual print parame-
ters. The exact procedure for setting the print parameters is
given in chapter "Print parameters for entries (entry defaults)",
Page 120.
If you now want to send the job, click in this window on "submit
job".
PREPARE PRINT JOBS
RW-480 CLIENTS 131