Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 86

Hide thumbs Also See for RW-480 PLOTCLIENT HDI/ADI:
Table of Contents

Advertisement

umns from top to bottom until the column is full, before begin-
ning with the next column.
Sample Print
Activate this option, if you wish to test the quality of a print. Only
the first set of copies is printed. The print out of further sets of
copies is stopped so that you can check the quality of the print.
You are then asked, whether you wish to continue or abort the
plot.
Delete after Plot
If you activate this option, the job is deleted after printing.
Locked Print
By confirming the "Properties" button, a dialog is displayed in
which the user is requested to enter a password twice. After this,
the print out can only be started at the server RW-480
PLOTBASE, if the correct password has been entered. For the
password, more than 32 characters can be accepted, however,
it is recommended to use 4 to 32 characters!
Page Order
Here you can choose from three options of pages to be printed
– standard, reverse, auto:
standard: The set entries are printed out in the order they are
shown in the job editor ( 1, 2, 3 ... ). The order of the sheets in
the resulting stack depends on the selected output tray: If the
"front" tray is selected, the order of the sheets in the stack is the
same as the print order: 1, 2, 3,4 ... If the "rear" tray is selected,
the order of the sheets in the stack is reversed: ... 4, 3, 2, 1.
reverse: The set entries are printed out in reverse order ( ... 4,
3, 2, 1 ). The order of the sheets in the resulting stack depends
on the selected output tray: If the "front" tray is selected, the or-
der of the sheets in the stack is the same as the print order: ...
4, 3, 2, 1 If the "rear" tray is selected, the order of the sheets in
the stack is reversed again. The result is the original: 1, 2, 3, 4
...
auto: The print order depends on the selected tray. The order
of the sheets in the resulting stack does not depend on the se-
lected output tray. It is forward ( 1, 2, 3, 4, ... ) in case of tray
"front" and in case of tray "rear".
CONFIGURATION
RW-480 CLIENTS
86

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rw-480 winprint

Table of Contents