Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 121

to your requirements:
You can use the "Window", if you set a standard format e.g. ISO
A0 and want to extend the format width and format height. First
set the required format and then click in "Window". You can
now change the format width and height values to meet your
requirements.
If you want to scale the drawing smaller, activate "Percent". You
can now enter a value between 1.00 and 999.00 for the format
width and height.
X = format width
Y = format height
If you want to retain the size ratio of the drawing, activate the
option "Maintain ratio".
• Border
If you want a white border around the drawing plot, activate the
"ON" field and enter the required spacing for all side borders.
You can choose between the size units mm and inches.
• Copies
You can enter any number of copies between 1 and 999 to be
printed by the job.
• Media Source
You can select one of the plotter rolls offered. In addition, you
can also choose the "automatic" or "bypass" options. The "auto-
matic" option means that the plotter itself selects a suitable roll,
which corresponds to the given format. The "bypass" option me-
ans that you feed the print medium in the input tray yourself.
Note: If you choose the "bypass" option, please note,
that the format has to match with minimum size
182mm x 149mm.
• Media Type
Use this menu to select which type of media the drawing is to be
printed on: Don´t care, Paper, Translucent, Recycled Paper or
Film. The selection depends on what roll of medium you have
PREPARE PRINT JOBS
RW-480 CLIENTS 121