Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 100

INI file, the current settings in the windows are set as the basic
settings for this user. If the user name already exists, the current
settings are overwritten by the saved basic settings for this user
from the INI-file. The maximum number of characters can be
40.
Note: Insofar as the function "User authentication" is
activated at the RW-480 plotter, make sure that the
user name here is identical with the user which has
been set up there, otherwise the print job will not be
carried out! To keep a better check on all used user
names, it is advisable always to take the user names
used in the network. If you do not know the user
names set up at the RW-480 plotter, ask your adminis-
trator!
• Drawing content
Here you define which pattern RW-480 PLOTCLIENT HDI/ADI
should use for the dither procedure when producing a printout
with the RW-480 PLOTBASE. There is a choice between "Mixed",
"Line Art" and "Graphic Art". "Line Art" should be used preferably
if the drawing has lots of lines, "Graphic Art" is ideal for draw-
ings primarily with graphic content.
• Email
Enter the email address to which the RW-480 PLOTCLIENT
HDI/ADI should automatically send a message following suc-
cessful completion of the plot job.
• Color source
When you activate "File", the details for pen ink are used from
the plot file being printed. But if no settings have been entered
here, the plotter uses the standard defaults in the "Default.ssl"
file. When printing with "red", the HPGL settings of RW-480
PLOTBASE are used.
• Account
In this field the account number of the client is entered. This can
be an account number, which you assign in-house or the re-
PRESETS FOR PRINT JOBS
RW-480 CLIENTS 100