Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 84

wish to specify a more precise setting, choose one of the cate-
gories. The actual setting options then appear in the lower sec-
tion. You have the following setting options:
• Paper size
In this section of the tab you select the drawing format, to be
used for printing the drawing. You will find the drawing formats:
ISO A/B/C, ANSI A-E and ARC A-E.
[Paper Size] Manage
•
Press the button "Manage" to go to the dialogue for individual
management of the formats. On the left you will see all avail-
able formats, and on the right the buttons for your individual
settings. On the right you can use the button "New" to adjust up
to eight individual formats including name and allocation of the
units of measurement.
You can remove your own individual formats from the format
list again by pressing the button "Delete". You can only delete
your individual formats but not the standard default formats.
The eight buttons under "Select/Deselect" can be used to adjust
additional features, for example whether you want to see "All
ISO" formats or "No ISO" formats. The advantage of this is that
it makes the list of formats under "Paper size" more manageable
so that you can select the required formats more quickly.
• Media Source
You can select one of the three plotter rolls offered. In addition,
you can also choose the "auto" or "bypass tray" options. The
"auto" option means that the plotter itself selects a suitable roll,
which corresponds to the given format. The "bypass tray" option
means that you feed the print medium in the input tray yourself.
Note: If you choose the "bypass" option, please note,
that the format has to match with minimum size
182mm x 149mm.
• Output
You have two possibilities for the output of your printouts on
plotter RW-480: front and rear. The standard setting is output at
CONFIGURATION
RW-480 CLIENTS 84