Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 125

PREPARE PRINT JOBS
minimum pen width in "Pen settings" if the drawing is to be re-
duced in size and at least one maximum pen width if the draw-
ing is to be enlarged
• Clipping
The clipping command removes the white edges on the border
of the drawing. Most plotter languages differ from each other in
many ways to a greater or lesser extent – including with respect
to the section, which, put simply, refers to the paper size.
This fact means that undesirable printing results are obtained, if
a drawing is only printed in sections or in the most unfavorable
case a white sheet of paper comes out of the plotter.
The "Clipping" function is considered in the context of the widely
used reference plotter "HP DesignJet 1055 / 1055 CM": If you
activate the check box, the drawing is printed in exactly the
same way as it was printed on the "HP DesignJet" plotter. How-
ever, undesirable printing results can result, if the plotter lan-
guage of your plotter differs greatly from that of the "HP
DesignJet".
If you deactivate the function, RW-480 PLOTCLIENT WEB looks
for the drawing dimensions itself and thus guarantees that the
whole drawing is plotted
• Pen Source from File
If you activate this field, you instruct the plotter to use the pen
width information entered in the SSL file for the entry and not
the settings from the "Pens" tab. If no pen widths are defined,
the program uses your settings.
If you do not activate it, the program always uses your settings.
• Pen Colors from File
If you activate this field, you instruct the plotter to use the pen
color information entered in the SSL file for the entry and not the
settings in RW-480 PLOTCLIENT WEB. If no pen widths are de-
fined, the program uses your settings.
If you do not activate it, the program always uses your settings.
• Size
Enter the pen widths directly via the keyboard in the box left of
"Size". Activate the pen required in the list above and enter the
new pen width. The valid size unit is "mm".
If you want to "remove" a pen, you can enter the pen width as
RW-480 CLIENTS 125