Ricoh RW-480 PLOTCLIENT HDI/ADI Software Manual page 41

mats, which are the usual standards in Germany, all Europe
and in the USA: ISO A/B/C, ANSI A-E and ARC A-E.
In the format setting "Original" the program obtains the format
size from the original file of the drawing. This is the presetting.
If you use the format setting "Window", you can freely set the
values for the format width and format height, whereby the style
sheet is set by the window value. The freely settable settings re-
fer both to the alignment as well as the format size and the for-
mat margin:
Scale DX
Scale DY
If you want to scale the drawing smaller, set the format to "per-
cent". In this case the "Scaling" input field becomes active and
you can enter a value between 1.00 and 999.00.
If you choose one of the standard formats ISO, ANSI or ARC,
you can accept the dimensions or freely change them according
to your requirements:
You can use the "Window", if you set a standard format e.g. ISO
A0 and want to extend the format width and format height. First
set the required format and then click in "Window". You can now
change the "Scale DX" and "Scale DY" values to meet your re-
quirements.
The value x in the "Maintain ratio" window represents the side
proportions "width = x · height ". If you activate the "Maintain
ratio" option, you can only alter the values above it for the
width, i.e. the Scale DX. The Scale DY, or height is then adjusted
automatically, i.e. the drawing is scaled proportionally. This can
be useful e.g. if you know that the printout of a drawing is too
large for the paper size available. In this case, activate the
"Maintain ratio" option and reduce the value slightly, to obtain a
proportionally correct printout. The "Maintain ratio" option is al-
ready activated as a standard setting.
• Scaling
The X-scaling input field only becomes active if you have se-
lected the "Percent" format. Thus you can print off the drawing in
a free format of 1.00 % to 999.00 % of the original. The Scale
format width
format height
JOB EDITOR
RW-480 CLIENTS 41