Mixer/Tuning: Fx Send - Korg pa 500 User Manual

156 Song Play operating mode

Mixer/Tuning: FX Send

Use the TRACK SELECT button to switch from the Keyboard to
the Song tracks, and vice versa.
Upper Volume Link
This parameter allows you to define if changing the volume for
one of the Upper tracks, proportionally changes also the volume
for the other Upper tracks.
To save this parameter status, go to the Style Play mode, then
select the Write Global-Style Play Setup from the page menu (see
"Write Global-Style Play Setup dialog box" on page 103).
Note: This parameter is the same you can find in the "Preferences:
Style Play Setup" page of the Style Play mode (see page 100).
On When changing volume to one of the Upper
tracks, volume for the other Upper tracks
changes in proportion.
Off When changing volume to one of the Upper
tracks, only that track's volume is changed. Other
Upper tracks are left unchanged.
Dry
Use this checkbox to turn the dry (direct) track signal on or off.
On When checked, the direct, dry signal is sent to the
output, mixed with the FXs.
Track
Off When unchecked, the direct, dry signal is
removed from the audio output, and only sent to
the FXs. The effected signal will still be panned
(in stereo FXs only) according to the Pan value.
Track
Pan
Track position in the stereo field.
-64...-1 Left stereo channel.
0 Center.
+1...+63 Right stereo channel.
Volume
Track's volume.
0...127 MIDI value of the track's volume.
Play/Mute icon
Track's play/mute status. See "Keyboard track status" on
page 150 for more information.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Sty
Mixer/Tuning: FX Send
This page lets you set the level of the track's direct (uneffected)
signal going to the Internal FX processors.
Note: Song parameters cannot be saved when saving to a Perfor-
mance or STS.
The effect processors included in Pa500 are connected in paral-
lel, so you can decide which percentage of the direct signal can
be effected:
In case you want to send all of a track's signal to the effect (as
when using "insert" effects, like Rotary, Distortion, EQ...), just
set the Dry parameter to Off (see "Dry" above):
There are four Internal FX processors in Song Play mode. Usu-
ally, they are arranged as follows:
FX A Reverb processor for Sequencer 1 and 2.
FX B Modulating FX processor for Sequencer 1 and 2.
FX C Reverb processor for Keyboard tracks.
FX D Modulating FX processor for Keyboard tracks.
Out L/R
FX Processor
Out L/R
FX Processor
Sng