Event Edit: Filter; Pad Edit: Quantize; Pad Edit: Transpose - Korg pa 500 User Manual

Event Edit: Filter

This page is where you can select the event types to be shown in
the Event Edit page.
Turn On the filter for all event types you do not wish to see in
the Event Edit page.
Note: Some of the events are "ghosted", and non editable, since the
corresponding events are not editable in a Pad.
This is very similar to the Style Record's Event Edit Filter page. See
"Event Edit: Filter" on page 119 for more information on the filter page.

Pad Edit: Quantize

The quantize function may be used to correct any timing mis-
take after recording, or to give the pattern a "groovy" feeling.
After setting the various parameters, press Execute.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Resolution
This parameter sets the quantization after recording.
Start / End Tick
Use these parameters to set the starting and ending points of the
range to quantize.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to quantize.
Execute
Press this button to execute the operation set in this page.
Pad Record mode

Pad Edit: Transpose

In this page you can transpose the selected track(s).
Note: After transposing, please don't forget to readjust the "Key/
Chord" parameter in the main page of the Pad Record mode (see
page 134).
After setting the various parameters, press Execute.
CV (Chord Variation)
Use this parameter to select the Chord Variation for editing.
Value
Transpose value (±127 semitones).
Start / End Tick
Use these parameters to set the starting and ending points of the
range to be transposed.
Bottom / Top Note
Use these parameters to set the bottom and top of the keyboard
range to be transposed.
Execute
Press this button to execute the operation set in this page.
139
Event Edit: Filter