Style Element Track Controls: Keyboard Range; Style Element Track Controls: Noise/Guitar - Korg pa 500 User Manual

Professional arranger
Hide thumbs Also See for pa 500:
Table of Contents

Advertisement

This monitor should help you keeping track of them, and let you
access Event Edit only on the tracks containing the messages.
Press the START/STOP button to start playback, and look at the
indicators. When one of them lights up, you can enter Event Edit
on the corresponding track, and edit or remove the Expression
messages.
Expression
Use these knobs to set the Expression (CC#11) value for the cor-
responding track. This value can be seen at the beginning of the
Event Edit list (see "Event Edit: Event Edit" on page 117).
Different Expression values can be defined for each Style Ele-
ment. This way, you can set a different volume in each Style Ele-
ment, relative to the general Volume value set in the Style
Header.
Volume area
Use these controls to set the volume and status of each track. See
page 110 for more information.
The Volume value is the same for the whole Style. Use the
Expression controls to adjust the relative balance between tracks
in each Style Element.
Style Element Track Controls: Keyboard
Range
The Keyboard Range automatically transposes any pattern note
that would otherwise play too high or too low in pitch, com-
pared to the original acoustic instrument, when transposed by
the arranger. This will result in a more natural sound for each
accompaniment instrument.
For example, the lower limit for a guitar is E2. If you play a chord
under the E2, the transposed pattern could exceed this limit, and
sound unnatural. A Bottom limit set to E2 for the guitar track
will solve the problem.
Different Keyboard Range values can be set for each Style Ele-
ment.
Note: The Keyboard Range is ignored while recording. The selected
track can play on the full range of the keyboard.
When in this page, press the corresponding button on the con-
trol panel to select a Style Element (VARIATION1 ...
ENDING3).
To copy the settings of this page to another Style Element, use
the "Copy Keyboard Range" command from the page menu (see
"Copy Key Range dialog box" on page 130).
Style Record mode

Style Element Track Controls: Keyboard Range

Top/Bottom
Use these parameters to set the bottom and top of the keyboard
range for the corresponding track of the current Style Element.
Volume area
Use these controls to set the volume and status of each track. See
page 110 for more information.
Style Element Track Controls: Noise/
Guitar
The new Noise/Guitar page has been added to the Style Record >
Track Controls section.
RX Noise
Use these controls to adjust the volume of RX Noises in the cor-
responding tracks. This control applies to all types of tracks
(provided the Sound includes RX Noises).
Humanize GTR
Use these controls to apply a random value to the position,
velocity and length of notes of Guitar tracks (see "Track Type"
on page 126). This control has no effect on other types of track.
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents