Selecting and playing Styles
Press the SYNCHRO-START button to turn its LED on.
Play the keyboard.
Press START/STOP to stop the Style.
While a Tempo setting is saved with each Style or Performance, you can change it to be whatever you
like. You can use either of the following two methods.
While the Tempo parameter is selected, use the TEMPO/VALUE dial to
change its value.
When the Tempo parameter is not selected, or you are in any other page,
keep the SHIFT button pressed, and use the DIAL to change the Tempo.
The selected tempo will be shown in a small window.
Press the EXIT and MENU buttons at the same time to recall the saved
When the Syncho-Start function is turned on, the Style
starts playing as soon as you play a note or chord in the
chord recognition area. Play chords with your left hand,
and the melody with your right hand. The arranger will
follow your playing.
Note: You could sim-
ply press START/STOP to
start the Style, but the
allows you to make the
Style start in sync with
your playing on the key-
board. Therefore, it may
be considered a "more
musical" way of starting
Hint: As an alterna-
tive to using the TEMPO/
VALUE dial, hold the
Tempo value in the dis-
play, then move your ﬁn-
ger up/down or left/