Navigation Tools; Load - Korg pa 500 User Manual

Scrollbar
Use the scrollbar to scroll the list. Touching the arrows will scroll
one step at a time, while touching the bar will scroll one page at a
time.
Pressing the arrows while SHIFT is kept pressed jumps to the
previous or next alphabetical section, or file/folder type
(depending on the selected display order).
Device pop-up menu
Use this menu to select one of the available storage devices. Usu-
ally, only the card is available (apart for the Erase page).
Commands
Commands may be different depending on the shown page.
They are detailed in each relevant section.
Tabs
Use tabs to select one of the edit pages of the current edit section.

Navigation tools

When in a Media page, you can use any of the following com-
mands to browse through the files and folders.
Scrollbar
See "Scrollbar" above.
TEMPO/VALUE dial
Use these controls scroll the list up or down.
Device pop-up menu
See "Device pop-up menu" above.
Load/Save/Copy/Erase button
Executes the media operation.
Open button
Opens the selected folder or directory (whose name begins with
the " " icon.
Close button
Closes the current folder or directory, returning to the parent
("upper") level.
Media edit mode

Load

In this page you can load User data files (Performances, User
Sounds, User Styles, the SongBook, the Global) from a card to
the internal memory (SSD).
Note: While in this page, only data allowed for loading are shown.
All other files are hidden.
Loading all the User data
You can load all the User data with a single operation.
1. Insert a card into the card drive. Its content will appear in
the display.
2. If the folder you are looking for is inside another folder,
select this latter and press the Open button to open it. Press
the Close button to go back to the parent folder.
3. Select the ".SET" folder containing the data you wish to
load, and press Load to confirm the selection.
Note: Most data loaded from a card is merged with data
already existing in memory. For example, if there is data in all
two USER Style banks in memory (USER01, USER02), and
there is only the USER01 Style bank in the card, the USER01
bank is overwritten, while the USER02 bank is left
unchanged.
As a result, you will have a STYLE folder in memory contain-
ing the USER01 bank you just loaded, and the old USER02
bank.
Loading all data of a specified type
You can load all User data of a specified type with a single opera-
tion.
1. Insert a card into the card drive. Its content will appear in
the display.
2. If the folder you are looking for is inside another folder,
select the latter and press the Open button to open it. Press
the Close button to go back to the parent folder.
3. Select the ".SET" folder containing the data you wish to
load, and press Open to open the ".SET" folder. A list of
215
Navigation tools