Automatic Buttonhole - Janome Sewing Machine Instruction Book

1
2
3
4

Automatic buttonhole

Machine Setting
Pattern: 17
Thread tension: 1-5
Presser foot: Automatic buttonhole foot R
Foot pressure: 3
z Pull the button holder of the buttonhole foot all the
way out.
Insert the fabric under the foot. Press the up/down
needle button twice.
Remove the fabric to the left to draw the needle
thread through the hole of the foot.
Insert the garment under the foot, and lower the
needle at the starting point.
Then lower the automatic buttonhole foot R.
1 Button Holder
2 Needle Thread
3 Bobbin Thread
NOTES:
You do not need to pull down the buttonhole lever.
If you wish to change the buttonhole width and density
press the stitch width and length buttons.
If there is a difference in stitch density between the right
and left rows of the buttonhole, refer to page 58 for
correction.
To sew
x Depress the foot control to sew the left side up to the
required length of the buttonhole.
Stop the machine and press the reverse button.
4 Required Length
5 Reverse Button
5
39