Janome Sewing Machine Instruction Book page 39

b Start the machine to sew the buttonhole.
The buttonhole will be automatically sewn.
Step 1: The machine will sew the front bartack and the
Step 2: The machine will sew the right row.
Step 3: The machine will sew the back bartack, and
To sew another buttonhole, raise the presser foot. Move the
fabric to where the next buttonhole to be sewn, then lower
the foot and start the machine.
n When buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
m Remove the fabric and place a pin just below the
bartack at each end to prevent accidentally cutting
9
stitches. Cut the opening with the seam ripper.
Use an Eyelet puncher to open a keyhole buttonhole.
9 Seam Ripper
10 Eyelet Puncher
10
36
left row first.
Then it goes back to the starting point with
straight stitch.
the machine will stop and trim the threads
automatically.