Winding The Bobbin; Removing The Bobbin; Setting The Spool Of Thread - Janome Sewing Machine Instruction Book

Winding the Bobbin

Removing the bobbin

Slide the hook cover plate release button to the right,
1
and remove the hook cover plate.
Lift out the bobbin from the bobbin holder.
1 Hook Cover Plate Release Button
2 Hook Cover Plate
3 Bobbin
NOTES:
2
Avoid using a bobbin when it begins to empty since it
may cause thread bunching.
Always use the correct bobbin. Using a wrong bobbin
may cause malfunctions.
3

Setting the spool of thread

3
Place the spool of thread on the spool pin with the
thread coming off the spool as shown. Attach the
spool holder, and press it firmly against the spool of
1
thread.
1 Spool of Thread
2 Spool Pin
3 Spool Holder
NOTES:
2
Avoid using a paper spool when it begins to empty
since it will not unwind smoothly. It may cause the
thread to bunch or slip when using the auto thread
cutter.
5
5
Use the large spool holder for ordinary spools, while
the small spool holder for small spools.
4
4 Small Spool
4
5 Small Spool Holder
11