Automatic Buttonhole - Janome HD2200 Instruction Book

q w
r
z x c
v
b

Automatic Buttonhole

e
q Pattern selector: BH
w Presser foot:
3
2
4
e Thread tension: 1–5
r Stitch length:
t
t Stitch width:
* The size of buttonhole is automatically set by
placing the button in the automatic buttonhole
foot R.
* The button holder of the foot takes a button
size up to 2.5 cm (1˝) in diameter.
* Make a test buttonhole on a sample duplicating
the fabric, interfacing and seams of the actual
garment.
* Place the button on the fabric sample and
mark the top and bottom to determine the
position of buttonhole.
* Use the interfacing on the stretch fabrics.
z Turn the handwheel toward you to raise the
x Set the pattern indicator at "BH" by turning
c Attach the automatic buttonhole foot R.
v Pull the button holder to the back, and place
b Pull the buttonhole lever downward as far as
23
Automatic buttonhole foot R
0.5–1
4–6.5
needle to its highest position.
Raise the presser foot lifter.
the pattern selector dial.
the button in it.
Push back the button holder toward you as
far as it will go.
it will go.