To Sew A Shorter Darning; To Sew The Same Size Darning; To Adjust The Eveness Of Darning - Janome Sewing Machine Instruction Book

To sew a shorter darning

1
To sew a darning shorter than 2 cm (3/4"), first stop
the machine after sewing the required length, then
press the reverse button.
The required length has been determined.
Restart the machine and continue sewing until the
machine stops automatically.
1 Required Length
2 Reverse Button
2

To sew the same size darning

Simply restart the machine to sew another darning at
the same size.
To sew the darning at a different size
Press the memory button and start sewing from
the beginning.
To adjust the evenness of darning
The evenness of darning may vary depending on the
sewing condition, such as type of fabrics, number of
layers etc. You can correct the unevenness of darning
with the stitch length adjusting button.
If the left corner is lower than the right side, press on
"—" to correct it.
If the right corner is lower than the left side, press on
"+" to correct it.
NOTE:
The evenness can be adjusted within d1 to d9
(default setting is d5).
43