Table of Contents
Advertisement
q w e
r
t
Automatic Buttonhole
*The size of buttonhole is automatically set by placing
the button in the automatic buttonhole foot (R).
*The button holder of the foot takes a button size up
to
2.5 cm (1˝) in diameter.
*Make a test buttonhole on a sample duplicating the
fabric, interfacing and seams of the actual garment.
*Place the button on the fabric sample and mark the
top and bottom to determine the position of
buttonhole.
*Use the interfacing on the stretch fabrics.
Turn the handwheel toward you to raise the needle
q
to its highest position.
Raise the presser foot lifter.
Set the pattern indicator at "BH" by turning the pat-
w
tern selector dial.
Attach the automatic buttonhole foot (R).
e
Pull the button holder to the back, and place the
r
button in it.
Push back the button holder toward you as far as
it will go.
t Pull the buttonhole lever downward as far as it will
go.
24
Advertisement
Table of Contents
