Janome Sewing Machine Instruction Book page 38

c
1
v
2
4
3
6
No Gap
7
c Pull the buttonhole lever down as far as it will go.
NOTE:
If you start sewing without pulling down the buttonhole
lever, the LED window will show a warning
machine will stop after a few stitches. Pull the buttonhole
lever down and restart the machine.
Auto thread cutter
When the buttonhole sewing is finished, the threads will be
automatically trimmed.
v Insert the corner of the fabric under the foot. Press
5
NOTE:
Make sure there is no gap between the slider and spring
holder, otherwise the left and right length will be different.
6 Slider
7 Front stopper
8 Sewing Gap
8
35
1 Buttonhole Lever
the up/down needle button twice.
Remove the fabric to the left to draw the needle
thread through the hole of the foot.
Place the garment under the foot, and lower the
needle at the starting point of the buttonhole mark.
Then lower the automatic buttonhole foot R.
2 Buttonhole Mark
3 Needle Thread
4 Bobbin Thread
5 Starting Point
and the