Darning - Janome Sewing Machine Instruction Book

Darning

Machine Setting
Pattern: 20
Thread tension: 3-6
Presser foot: Automatic buttonhole foot R
Foot pressure: 3
Pull the button holder to the rear.
Place the garment under the foot.
Press the up/down needle button twice. Remove the
1
fabric to the left to draw both threads under the foot and
place the fabric back under the foot.
Lower the needle at the starting point then lower the foot.
1 Button Holder
2 Starting Point
2
Depress the foot control and the machine will sew a
darning 2 cm (3/4") long and stop automatically.
3
NOTE:
The maximum size of darning is 2 cm (3/4") long and
0.7 cm (1/4") wide.
4 3 Maximum Length 2 cm (3/4")
4 Maximum Width 0.7 cm (1/4")
2
Repeat sewing in the different direction until the darning
covers the rip or hole.
42