3006: Zpwy-Err-Tcp-Badpuparamsize; 3007: Zpwy-Err-Tcp-Nobasedisplay; 3008: Zpwy-Err-Tcp-Baddataref; 3009: Zpwy-Err-Tcp-Badscreenterm - HP NonStop Pathway/iTS Programming Manual

Management programming manual
Table of Contents

Advertisement

TCP Error Messages

3006: ZPWY-ERR-TCP-BADPUPARAMSIZE

The maximum size of a parameter passed in the USING clause of the CALL statement
did not equal the maximum size of the corresponding parameter given in the procedure
division header of the called program.
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
Effect. The operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For
instructions on how to locate the problem within the program, see
Information for Terminal Errors

3007: ZPWY-ERR-TCP-NOBASEDISPLAY

A screen manipulation was attempted before the execution of a DISPLAY BASE
statement.
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
Effect. The operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For
instructions on how to locate the problem within the program, see
Information for Terminal Errors

3008: ZPWY-ERR-TCP-BADDATAREF

An attempt was made to reference data outside the SCREEN COBOL program's local
data area.
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
Effect. The operation fails.
Recovery. Isolate and correct the problem within the SCREEN COBOL program. For
instructions on how to locate the problem within the program, see
Information for Terminal Errors

3009: ZPWY-ERR-TCP-BADSCREENTERM

An attempt was made to execute a SCREEN COBOL program unit compiled for one
type of device on an incompatible device. If the device types are compatible, then a
TCP internal error has occurred.
This error does not appear in the RETCODE token or in an error list; it appears only in
response to a STATUS TCP or STATUS TERM command.
NonStop Pathway/iTS Management Programming Manual—426749-002
on page 12-3.
on page 12-3 at the beginning of this section.
on page 12-3 at the beginning of this section.
12- 5
Error-Message Range 3000 Through 3999
Additional
Additional
Additional

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents