Table 3-5. Required Object States For Continuation - HP NonStop Pathway/iTS Programming Manual

SPI Programming Considerations
Required Object States for Continuation
For each type of command, continuation only acts on objects in a specific state. If an
object is not in the required state, responses might not be returned for all objects or
subobjects requested.
subsystem command that supports continuation and each object type applicable to that
command.
Table 3-5. Required Object States for Continuation (page 1 of 2)
Command
ABORT
DELETE
FREEZESTATUS
GETVERSION
INFO
REFRESHCODE
RESUME
START
STATS
STATUS
NonStop Pathway/iTS Management Programming Manual—426749-002
Table 3-5 indicates the required state for each Pathway
Object Type Required Object State
TCPTERM TERM running or suspended;
TERM TCP running or suspended
PROG Stopped
PROGTERM Stopped
TCP Stopped
TCPTERM TERM stopped; TCP running
TERM Stopped
SCTERM TERM linked to the specified SC; TERM preventing
the freezing of specified SC
TCP Running
PROG Any state
PROGTERM Any state
TCP Any state
TCPTERM Any state
TELL Any state
TERM Any state
TCP Running, ZCHECKDIRECTORY field defined as
ZPWY-VAL-OFF
TCPTERM TERM suspended; TCP running
TERM Suspended
TCP Stopped
TCPTERM TERM stopped; TCP running
TERM Stopped
TCP Running
TCPSC SC running and linked to specified TCP
SCTCP TCP running and linked to specified SC
TCP set to STATS ON
TCPTERM TERM running; TCP running
TERM Running
TCP Any state
TCPLINK Any state
TCPTERM Any state
TERM Any state
3- 23
Required Object States for Continuation