Zpwy-Map-Status-Tcplink - HP NonStop Pathway/iTS Programming Manual

ZPWY-MAP- Definitions

ZPWY-MAP-STATUS-TCPLINK

This token reports either the count of links to the server (if LINKDEPTH is greater
than 1) or the rank of the server in the server class (if LINKDEPTH is 1).
def ZPWY-DDL-STATUS-TCPLINK.
02 ZSTATUSTIME
02 ZISCOUNT
02 ZRANKCOUNT
end.
ZSTATUSTIME
gives the time this status was collected, as a four-word GMT timestamp.
ZISCOUNT
indicates whether the value in ZRANKCOUNT is the rank the TCP gave to the
server or whether the value is a count of the number of links to the server. The
following values are possible:
ZPWY-VAL-NO
ZPWY-VAL-YES
ZRANKCOUNT
contains a rank or a count. If the value is a rank, the following values are possible:
The first link to the server class; this is the highest preference.
0
The second link to the server class; this is the next-highest preference.
1
The third or subsequent link to the server class; this is the lowest preference.
2
NonStop Pathway/iTS Management Programming Manual—426749-002
token-type ZSPI-DDL-TIMESTAMP.
token-type ZPWY-DDL-YES-NO.
token-type ZSPI-DDL-INT.
The value in RANKCOUNT is a rank.
The value in RANKCOUNT is a count.
6- 72
ZPWY-MAP-STATUS-TCPLINK