HP NonStop Pathway/iTS Programming Manual page 215

TERM Commands
Tokens in Response Buffer
ZSPI-TKN-RETCODE
For ADD TERM, common error values for ZSPI-TKN-RETCODE are:
Error
Number
1012
1101
For descriptions of error-token values and their associated error lists, see
Section 11, TCP Event Messages
Considerations
Each TERM name in ZPWY-DDL-SEL-TERM must be unique within the Pathway
subsystem.
The TCP opens the TERM file with a syncdepth of 1.
Before adding a TERM description to the PATHMON configuration file, you must
assign values to all of the required fields listed for this command.
To specify node-independence for TERM object attributes, specify \* for node
names or omit node names and set ZNODEINDEPENDENT to ON in the TS/MP
START PATHWAY command.
NonStop Pathway/iTS Management Programming Manual—426749-002
Error Token
ZPWY-ERR-PM-DUPNAME
ZPWY-ERR-PM-
TOOMANYTERM
Description
The PATHMON process encountered a
duplicate TERM object name.
The value specified for ZMAXTERMS
was reached.
and Section 12, TCP Error
8 -5
ADD TERM
Messages.