ZPWY-MAP- Definitions
ZPWY-MAP-DEF-PROGTERM
ZPWY-MAP-DEF-PROGTERM identifies an extensible structured token that defines
the attributes for a Pathway subsystem TERM object associated with a specific PROG
object.
def ZPWY-DDL-DEF-PROGTERM.
02 ZBREAK
02 ZDISPLAYPAGES
02 ZECHO
02 ZEXCLUSIVE
02 ZINITIAL
02 ZIOPROTOCOL
02 ZMAXINPUTMSGS
02 ZTCLPROG
02 ZTRAILINGBLANKS
end.
ZBREAK
specifies whether the TCP accepts the Break key function for its devices running in
conversational mode. ZBREAK can have the following values:
ZPWY-VAL-OFF
directs the TCP to disregard the Break key function.
ZPWY-VAL-ON
directs the TCP to accept the Break key function. If the TCP is executing a
SCREEN COBOL program in conversational mode, the user can press the
Break key to prematurely terminate ACCEPT and DISPLAY statements.
If the user presses the Break key while the TCP is executing a DISPLAY
statement, the terminal output stops and the DISPLAY statement is terminated
normally with the special register TERMINATION-SUBSTATUS set to 1. If the
Break key is not used, TERMINATION-SUBSTATUS is set to 0 after the
completion of a DISPLAY statement.
If the user presses the Break key while the TCP is executing an ACCEPT
statement that is coded with an ESCAPE ON ABORT clause, the TCP stops
accepting terminal input and terminates the ACCEPT statement without
changes to the working-storage section. Pressing the Break key has no effect
on the TCP when the ACCEPT statement is coded without an ESCAPE ON
ABORT clause.
If the TCP is executing a statement other than ACCEPT or DISPLAY, it does
not accept the Break key.
If a process is running as a terminal emulator, the value for this field always
defaults to ZPWY-VAL-OFF. If you do not assign a value to this field, the default is
NonStop Pathway/iTS Management Programming Manual—426749-002
token-type ZPWY-DDL-ON-OFF.
token-type ZPWY-DDL-1-255.
token-type ZPWY-DDL-ON-OFF-CURRENT.
token-type ZPWY-DDL-ON-OFF.
token-type ZPWY-DDL-SCOBOL-PUNAME.
token-type ZPWY-DDL-IO-PROTOCOL.
token-type ZPWY-DDL-0-2045.
token-type ZSPI-DDL-FNAME32.
token-type ZPWY-DDL-ON-OFF.
6 -8
ZPWY-MAP-DEF-PROGTERM
Need help?
Do you have a question about the NonStop Pathway/iTS and is the answer not in the manual?