Zpwy-Ddl-Frzstateterm-Value; Zpwy-Ddl-Nonstop-Value; Zpwy-Ddl-Objstate-Value; Zpwy-Ddl-Pop-Value - HP NonStop Pathway/iTS Programming Manual

ZPWY-DDL- Definitions

ZPWY-DDL-FRZSTATETERM-VALUE

ZPWY-DDL-FRZSTATETERM-VALUE specifies the freeze status of a TERM object
preventing a server process from being frozen.
def ZPWY-DDL-FRZSTATETERM-VALUE
Values are described with

ZPWY-DDL-NONSTOP-VALUE

ZPWY-DDL-NONSTOP-VALUE designates whether the TCP runs with a backup
process.
def ZPWY-DDL-NONSTOP-VALUE
The following values are valid:
ZPWY-VAL-NONSTOP0 Directs the TCP not to run with a backup process.
ZPWY-VAL-NONSTOP1 Directs the TCP to run with a backup process.
If you do not assign a value to this field, the default is ZPWY-VAL-NONSTOP1.

ZPWY-DDL-OBJSTATE-VALUE

ZPWY-DDL-OBJSTATE-VALUE provides the state of a TCP or TERM object.
def ZPWY-DDL-OBJSTATE-VALUE
The following values are valid:
ZPWY-VAL-STOPPED
ZPWY-VAL-PENDING
ZPWY-VAL-SUSPENDED The object is suspended.
ZPWY-VAL-RUNNING

ZPWY-DDL-POP-VALUE

ZPWY-DDL-POP-VALUE provides the name of the currently executing SCREEN
COBOL instruction in response to a STATUS TERM command. This is internal
information.
def ZPWY-DDL-POP-VALUE
NonStop Pathway/iTS Management Programming Manual—426749-002
ZPWY-MAP-STATUS-TERMFREEZE
The object is stopped.
The object is stopping.
The object is running.
5- 23
ZPWY-DDL-FRZSTATETERM-VALUE
token-type ZSPI-DDL-ENUM.
on page 6-79.
token-type ZPWY-DDL-ENUM.
token-type ZSPI-DDL-ENUM.
token-type ZSPI-DDL-ENUM.