HP NonStop Pathway/iTS Programming Manual page 194

Terminal Control Process (TCP) Commands
Tokens in Response Buffer
ZSPI-TKN-RETCODE
For REFRESHCODE TCP, a common error value for ZSPI-TKN-RETCODE is:
Error
Number
1116
For descriptions of all error-token values and their associated error lists, see
Section 11, TCP Event Messages
Considerations
The REFRESHCODE TCP command operates in conjunction with the
ZCHECKDIRECTORY field. When the ZCHECKDIRECTORY field has the value
ZPWY-VAL-OFF, the TCP reads the TCLPROG directory file during a SCREEN
COBOL CALL statement only if one of the following conditions exists:
The called program is not in the TCP code area.
The called program is in the TCP code area, but a REFRESHCODE TCP
command has been issued since the last time a call was made to the
referenced program unit.
If the ZCHECKDIRECTORY field has the value ZPWY-VAL-ON, the TCP always
checks the TCLPROG directory file for the latest program version when executing
a SCREEN COBOL CALL statement. Therefore, using the REFRESHCODE TCP
command when the ZCHECKDIRECTORY field is set to ZPWY-VAL-ON is a
redundant operation and the Pathway subsystem returns an error.
If a primary TCP fails and the ZCHECKDIRECTORY field has the value
ZPWY-VAL-OFF, the TCP automatically reads the TCLPROG directory file during
a SCREEN COBOL CALL statement before the backup TCP takes over. This
action occurs even if a REFRESHCODE TCP command is not issued.
NonStop Pathway/iTS Management Programming Manual—426749-002
Error Token
ZPWY-ERR-PM-
ALREADYREFRESHED
Description
The ZCHECKDIRECTORY field in ZPWY-
MAP-DEF-TCP is set to ZPWY-VAL-ON.
and Section 12, TCP Error
7- 14
REFRESHCODE TCP
Messages.