Table of Contents
Advertisement
Temperature Units
The TempUnits field determines whether
engineering units for temperature will be dis-
played in degrees Fahrenheit or degrees Celsius.
Zone
The Zone field allows you to assign this
CUB to a zone along with other CUBs in the
same motor room for purposes of controlling
motor room temperature.
8.2.3.5.
Time and Date
NetwrkAlarm: NO
NetworkTime: YES
Time: 15:00:04
Date: 01/04/02
Network Alarm
This field specifies whether you want the
CUB to set its alarm output if it goes offline.
Network Time
This field specifies whether you want the
CUB to keep its own time clock synchronized
with its parent E2 or Einstein's clock. Set this
field to ENABLE if you want CUB to synchro-
nize its time with E2 or Einstein, or DISABLE if
you don't want time synchronization.
Time
The Time field sets the time clock for the
MultiFlex CUB. Enter the current time in 24-
hour format (HH:MM:SS).
Date
The Date field sets the date for the MultiFlex
CUB. Enter the current date in MM/DD/YY for-
mat.
48 • MultiFlex CUB-II and CUB-TD I&O Guide
8.2.3.6.
Daylight Savings Time
Daylight Savings
APR NO DLT
DLT Savings End
OCT NO DLT
Daylight Savings
The three fields under the Daylight Savings
heading determine which day of the year the
MultiFlex CUB's internal clock will adjust the
time to observe daylight savings time. The three
fields, in order are:
• MONTH - The month in which daylight savings
time begins. This should be set to APR (April) if fol-
lowing standard U.S. DST guidelines.
• WEEK - The week in which daylight savings time
begins. This should be set to "1st Week" if follow-
ing standard U.S. DST guidelines, or "NO DLT" if
you do not wish to follow daylight savings time.
• DAY - The day of the week in which daylight sav-
ings time begins. This should be set to SUN (Sun-
day) if following standard U.S. DST guidelines.
Daylight Savings End
Like the Daylight Savings fields described
above, the three fields under DLT Savings End
determine the month, week, and day that day-
light savings time ends for the MultiFlex CUB's
internal clock.
If you wish to follow U.S. DST guidelines,
set these three fields to OCT, 5th Week, and
SUN respectively. To disable DST, set the Week
field to NO DLT.
8.2.4. Setpoints Screens
NOTE: The following screens are only for
CUB TD and CUB-II with TD Strategy. CUB
TD consists of the next three screens (Con-
denser SPs, TD Strat Info, and TD Max).
For CUB temperature differential (TD), the
Strategy is fixed as TD. The CUB Strategy can
be set as TD or Traditional. For more informa-
tion on TD Strategy, see Section 6.2.1., Temper-
ature Differential (TD) Strategy.
SUN
SUN
026-1705 Rev 7 06-APR-2010
Advertisement
Table of Contents
