To Change Options Level 2 ( For The Store Manager); Fahrenheit Or Celsius Display; Password Change Or Required - Pitco L22-355 Service Manual

Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
3

To Change Options Level 2 ( for the Store Manager):

The display must show
product key [0] is pressed, the display will show
lights above product keys will illuminate to represent options that may be changed. Each option
listed below uses the product key [0] to toggle or scroll through available choices in the display.
When the correct value is displayed, press the
return to
3.1

Fahrenheit or Celsius Display:

The Controller will display temperatures in the Fahrenheit or Celsius scales. The default scale is °F.
With display showing
 Display shows
 Press product key 1, display shows [DEGREE n] [F OR C], where "n" is the current
setting.
 Use the product key [0] to scroll through choices (F or C). Press
choice.
 Display shows
3.2

Password Change or Required?

With factory settings, an operator password is not required to enter programming Levels 1 and 2.
The password may be activated or changed in these steps.
With display showing
 Display will show
 Press product key 2, display shows [SET PAS] [NEW PASS]. Use the product key [0] to
scroll through choices [NO PASS] or [PASS REQ]. Press
 If [NO PASS] is selected Display returns to
 If [PASS REQ]. is selected, display will show [PASSnnnn] [NEW PASS] to prompt for new
password. Displayed value "nnnn" is the current password. Use the product keys for numeric
entry to change password. Press [P] key to save choice. Display then shows
Note: The factory default password (6684) will always work even if a different password is selected
here.
L22-355 Rev 1
from section 2 to change these options. When the
for another option selection.
, press the product key [0].
.
, press the product key [0].
Page 10 of 28
key to save choice. The display will again
.
.
key to save choice.
.
0
. Indicator
1
key to save
2
.