Spin Diagnostics; Motor On/Off; Motor Speed - Increase; Motor Speed Decrease - Pitco L22-355 Service Manual

5.10 Spin Diagnostics

The Spin Diagnostic menu is used to determine the functionality of controller outputs and inputs.
By exercising each output and examining inputs, a determination can be made if an appliance
problem is controller related. In the diagnostic menu, product keys are assigned specific inputs or
outputs.
All outputs in the ON state should produce 22VDC at the appropriate pins on the controller
connector. Controller inputs can be verified by the on or off state of the indicator above the product
key. This section details the process of checking each input and output.
 With display showing
[SPIN][DIAGNOST]
The following list describes the function of each key in the spin diagnostic mode.
Function

5.10.1 Motor On/Off

5.10.2 Motor Speed - Increase

5.10.3 Motor Speed Decrease

5.10.4 Spin Direction

5.10.5 Door Open

5.10.6 Cook Position Indicator

5.10.7 Load Position Indicator

5.10.8 Spin Position Indicator

5.10.9 Basket Lift Position (Cook)

5.10.10 Basket Lift Position (Load)

5.10.11 Basket Lift Position (Spin)

Note: LSW – Limit Switch. This is the black collar located on the basket lift actuator.
 Press
Description
Toggles spin motor on and off.
Increases the spin motor's speed in 10 RPM
increments up to a maximum of 500 RPM.
Decreases the spin motor's speed in 10 RPM
increments up to a minimum of 60 RPM.
Toggles the motor's spin direction from spinning
clockwise to counter-clockwise or vice-verse. To be
used if object becomes stuck during spinning.
Activates the indicator light to show the door's current
position.
Activates the indicator light to show the basket lift's
current position. Shows CLOSED if not in the stated
position.
Activates the indicator light to show the basket lift's
current position. Shows CLOSED if not in the stated
position.
Activates the indicator light to show the basket lift's
current position. Shows CLOSED if not in the stated
position.
Moves the basket lift into the cook position.
Moves the basket lift into the load position.
Moves the basket lift into the spin position.
the display will return to
Page 21 of 28
Spin Fryer I12 Cooking Computer
press product key 9. The screen will show
.
Pitco P/N 60149505
Button
L
1
2
3
5
6
7
8
9
0
R
L22-355 Rev 1