Factory Reset; Standing Pilot Toggle; Set Network Address; To Exit Programming Level 3 - Pitco L22-355 Service Manual

Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
4.8.7

Factory Reset

Factory Reset provides a quick way to erase all setup changes and restore control to
factory settings.
Warning: Any settings made prior to a factory reset will be lost. This includes
customer specific downloads performed at Pitco Frialator. Heat profile after a reset
is Generic 1 for gas appliances.
With the display showing
moments, the display will show [ P ]. Press the
4.8.8

Standing Pilot Toggle

For some applications, it is desirable to maintain the gas pilot flame when the appliance is
OFF. Heat from the pilot keeps solid shortening in the liquid state for quicker warm-ups in the
morning. Default setting for standing pilot is off.
Note: Heat Demand Profile (section 4.8.3) must be set to Generic 1, or T-stat.
Standing Pilot toggle has no effect in with any other setting.
With the display showing
show [STANDING] [PILOT n], where "n" is ON or OFF. Use product key [0] change value, then
press the
4.8.9

Set Network Address

With the display showing
 Display will show [ADDR aa], where "aa" is a current address (default is 31) for this control.
When controls are connected together for data collection, all controls must have different
addresses for cooking computers that are tied together with the RS-485 communications
port.
 To change this value, use the product keys for numeric entry of a new value.
 Press the
4.9

To Exit Programming Level 3

With display showing
 Display will show
the next step. To return to normal operations, press the
L22-355 Rev 1
.
to save choice. Display returns to
key. Display returns to
, press the
. Continue with changes in sections 2 or 3, or continue exit with
Page 18 of 28
, press 8 product key. After a few
display will return to
, press product key 9. Display will
, press key R.
key.
key again.
8
.
R
.