Heat Demand Profile; Shake Alarm Duration; Hold Alarm Duration; Cancel Duration - Pitco L22-355 Service Manual

4.8.2

Heat Demand Profile

With display showing
[xxxxxxx] [HEAT DEM], where xxxxxxx may be one of 6 heat control profiles listed below.
1. [GENERIC 1] for gas fired fryer appliance. This is the factory default.
2. [GENERIC 2] for electric fryer appliances, and model SGH50.
3. [TEST] for use in special cook testing, do not select this setting for normal operations.
Use product key [0] change value, then press the
4.8.3

Shake Alarm Duration

With display showing
[SH-DUR:nn] [DURATION], where "nn" is the time in seconds the shake alarm will sound. Use
product keys for numeric entry of desired value, then press the
returns to
4.8.4

Hold Alarm Duration

With the display showing
show [HD-DUR:nn] [DURATION], where "nn" is the time in seconds the hold alarm will sound.
Use product keys for numeric entry of desired value, then press the
Display returns to
4.8.5

Cancel Duration

With the display showing
show [CANCEL:nn] [DELAY] , where "nn" is the time in seconds the operators must press a
product key to cancel a cook. Use product keys for numeric entry of desired value, then press
the to save choice. Display returns to
2 seconds.
4.8.6

Configuration Value

With display showing
[CFG hhhh], where "hhhh" is a hexadecimal checksum of the configuration memory contained
in the controller. Modifications to any part of the setup of this control will change the check
sum value. Press the
.
.
.
display will return to
Page 17 of 28
Spin Fryer I12 Cooking Computer
Pitco P/N 60149505
, press product key 3. Display will show
to save choice Display returns to
, press product key 4. Display will show
to save choice. Display
, press product key 5. Display will
to save choice.
, press product key 6. Display will
. Default value is
, press product key 7. Display will show
L22-355 Rev 1
3
4
5
6
7
.