Programming Cooking Temperature.2-7; Level 2 Programming.2-7 - Pitco E7 Installation, Operation And Maintenance Manual

the desired time by using the numbered keys. Press the (©] key to set the corresponding SHAKE time using the
numbered keys. Press the (®) key to set the corresponding HOLD time using the numbered keys. Pressing the fjp
key two times at any point during this proceedure will return you to the normal cook mode.
2.4.3 Programming Cooking Temperature
This setting determines the thermostat setting for the computer. Unlike conventional thermostats,
once the computer is set it will never need calibration. Set the desired temperature by performing
the following procedure.
Press the QQ key followed by the QQ key. The new COOK temperature may now be set using
the numbered keys. Pressing the [jg key two times at any point during this proceedure will return
you to the normal cook mode.
2.4.4 Level 2 Programming.
There are several features that merit mention at this point. Their programming functions are
explained along with their descriptions.
To
enter the level
2
programming mode press the
gg
key followed by the
g
key. If a password
has been set you will be asked to enter it, if you do not remember what the password is use "6684"
This will allow you to program these basic functions and reset the password.
To choose between "°F" or "°C" press the
~
key and use the - key to toggle between the options.
To set
"PASSWORD REQUIRED"
or
"NO PASSWORD"
press the
g
key and use the
g
key to
toggle between the two options. To set a new password press the jjg key and enter a four digit
password. Press the
(jpj
key again and the display will return to the normal cook mode. To continue
setting level options in the level 2 programming you must re enter to level 2 programming mode in
the same manner as before.
To set the beeper volume press the
g
key and use the
g
key to toggle between the options.
To set the Language option press the
g
key and use the
g
key to toggle between the options. At
the time of printing the only language option available is SPANISH (ESPANOL). When a language
option has been set the display will show in that language.
Pressing the (]p| key two times at any point during this proceedure will return you to the normal cook
mode.
2-7