Set Mode - Icom IC-R75 Instruction Manual

• Speech speed
When the optional UT-102
is installed, you can select between faster or slower
synthesizer output.
See p. 34 for unit installation.
• Speech S-level
When the optional UT-102
is installed, you can have signal level, frequency,
mode and current time announcement. Signal level
announcement can be deactivated if desired.
See p. 34 for unit installation.
• Speech current time
When the optional UT-102
is installed, you can have signal level, frequency,
mode and current time announcement. Current time
announcement can be deactivated if desired.
See p. 34 for unit installation.
• RTTY mark frequency
This item selects the RTTY mark frequency. RTTY
mark frequency is toggled between 1275, 1615 and
2125 Hz.
• RTTY shift width
This item adjusts the RTTY shift width. There are 3
selectable values: 170, 200 and 425 Hz.
• LCD backlight
This item adjusts the brightness of the LCD from 0
% to 100 % in 1 % steps.
• The brightness is displayed in 10% steps. '5' indicates
50% brightness.
• Auto tuning step
This item sets the auto tuning speed. The tuning dial
normally changes the frequency 2.5 kHz/revolution
in 10 Hz tuning step. When auto tuning speed is
turned on this increases to 50 kHz/revolution in 50
Hz tuning step during quick rotation of the dial.
VOICE SYNTHESIZER UNIT
VOICE SYNTHESIZER UNIT
VOICE SYNTHESIZER UNIT
9

SET MODE

33